What Is a "Fake Omega 5710"?
A fake Omega 5710 is a counterfeit watch sold under a seller code, not an official Omega reference. Omega's catalog uses eight-digit references such as 210.30.42.20.03.001, so a five-digit tag like 5710 comes from the replica trade, not from the brand. In practice, "5710" acts as inventory shorthand for a batch of cases and movements that a workshop built.
That matters because the code tells you nothing about what sits inside the watch. Two listings with the same 5710 tag can carry different movements, crystals, and case steels. Judge the watch on its parts, never on the number in the title.
Why Do Replica Listings Use Short Codes Like 5710?
Sellers reuse short codes to track batches from different workshops without naming the factory that made them. The code keeps listings searchable and lets a seller swap suppliers without rewriting the product page. It also hides quality differences behind one label.
- Movement: quartz, a Japanese automatic like the Seiko NH35, or a Chinese copy of the ETA 2824.
- Case material: 316L steel, 904L steel, or plated brass on the cheapest builds.
- Crystal: mineral glass at the bottom tier, sapphire with or without anti-reflective coating higher up.
- Finishing: laser-etched logos and printed bezel inserts on low grades, machined and stamped parts on better ones.
How Do You Tell a Fake Omega 5710 From a Genuine Omega?
Start with the reference number and the movement. Those are the two details a counterfeiter cannot copy without spending real money. Then work through the outside of the watch.
Case, Bezel, and Finishing
- Genuine steel cases show crisp brushing and polished flanks that meet at a sharp, clean line. Copies round that edge off.
- Real ceramic bezel inserts sit flush in the ring. Fake inserts often stand proud, show a gap at the edge, or use a printed sticker.
- Crown guards and lugs on copies look thicker or softer than the original. Compare shapes side by side, not from memory.
Dial and Hands
- Print quality: genuine dial text is sharp under a loupe. Copies show joined letters, fuzzy edges, and uneven spacing.
- Lume: Super-LumiNova glows bright and fades over hours. Cheap lume looks grainy and dies in minutes.
- Date wheel: check the font, the window cut, and whether the date sits centered.
Movement and Case Back
Ask for a clear photo of the movement through the display back. Modern Omega watches run Co-Axial Master Chronometer calibres (8800, 8900, 9900) that carry METAS certification and a serial tied to that watch. Fakes carry plain or minimally decorated automatics, and the rotor engraving is often laser work.
A solid case back on a model that should have a display back is a red flag. So is a serial number that an Omega boutique or service center cannot match to a reference.
Bracelet, Clasp, and Weight
- End links should sit flush against the case with no gap or rattle.
- Genuine clasps use stamped or engraved markings with tight tolerances. Copies show shallow laser etching.
- Weight helps. A steel dive watch on a full bracelet tends to land near 180 to 200 grams. Light copies use thinner steel.
What Movement Sits Inside a Fake Omega 5710?
Most fakes fall into three groups, and the movement decides how the watch feels on the wrist.
- Quartz. The second hand ticks once per second. Cheap, accurate, and nothing like a mechanical Omega.
- Entry automatic. Seiko NH35 or Miyota 8215. Reliable workhorses with about 40 hours of power reserve and a 21,600 vph beat.
- Clone automatic. Copies of the ETA 2824 or decorated Co-Axial style movements. Beat rate matches at 28,800 vph, but decoration, power reserve, and accuracy do not.
A genuine Omega 8800 runs at 25,200 vph with about 55 hours of power reserve and a magnetic resistance rating of 15,000 gauss. No fake hits that spec sheet, even when the outside looks close.
What Does a Fake Omega 5710 Cost?
Replica pricing splits into clear tiers, and the spread is wide.
- $60 to $120: quartz or low-grade automatics, mineral glass, plated or thin steel.
- $150 to $350: mid-tier automatics with sapphire crystal and better case finishing.
- $400 to $700: super clone builds with clone movements, 904L steel, and closer dial work.
Genuine steel Omega dive watches sell in the mid four figures at retail, and they hold value. A fake resells for a fraction of what it cost, if it sells at all.
Which Detail Gives a Fake Away Fastest?
The movement, nine times out of ten. Case and dial copies have improved a lot, but the internals get the least attention. Open the case back or ask for a photo, and the answer shows up in seconds.
Is Buying a Fake Omega 5710 Legal?
Counterfeit watches are illegal to import and sell in the US, the EU, and most other markets. US Customs can seize a shipment, and a seller who imports copies for resale faces civil liability and criminal exposure under trademark law. Personal buyers carry less legal risk than sellers, but the watch still arrives with no warranty, no Omega service support, and no resale market.
FAQ
Does an Omega 5710 exist?
No current Omega model carries that reference. If a genuine Omega once used the number, it would be a vintage piece, not a modern one. Modern Omega references run eight digits with dots.
How do I verify a real Omega?
Get the full reference number and serial, then confirm both with an Omega boutique or an authorized service center. A Master Chronometer card and a METAS certification record add a second check.
Why do fakes pass a casual look?
They copy the outside. Case shape, dial print, and logo placement can look right at arm's length. Materials, movement, and finishing are where the cost was cut.